E-Series Custom Solutions
Core Advantages:
① Precision Touch
✔ 10-32 simultaneous touch points
✔ Ultra-fast 10ms response time
✔ Full touch coverage up to 12m (only 10-20cm inactive edges on 17m displays)
✔ Sunlight-Resistant Design : High-intensity infrared emitting diodes mounted on the lower bezel，Stable performance under 10,000 LUX ambient light (equivalent to direct sunlight)
② Smart Architecture
✔ Modular design for easy maintenance (60% cost reduction) – Directly replace the PCBA light board without dismantling the structure, and replace the core components at a low cost
✔ The QC-SUSB module defaults to Fixed Mapping Mode, transitioning to Dynamic Mapping Mode upon receiving configuration commands from an external controller.
✔ Built-in diagnostics & 3D installation guidance
③ Universal Compatibility
✔ Plug-and-play: Windows/macOS(Multi-touch Driver is available)/Linux/Android
✔ Debugging detection efficiency is high with intelligent diagnostic software;
✔ SDK for system integration & TUIO protocol support
Large size Electronic Whiteboard, Advertising Machine, Splice Liquid Crystal Display, Showcase Enhancement, Educational Interactive Stations, Information Machine, Touch Video Wall, Interactive Exhibition Walls/Interactive Digital Showroom
Museum
Right-angle screen
Visualization display screen
Column display screen
Large-sized commercial display screen 1
Large-sized commercial display screen 2
Red Culture Museum
Military Command Center
Museum of Cultural Relics
Interactive Game 1
Interactive Game 2
Interactive Game 3
Size（Customize）：>32’’(max 1000”)
detectable touch points：10~32 points
Glass：Non
Frame Color：Black
Frame Thickness：12mm
Power Supply：
• USB Series A：USB2.0（Full speed. Compatible with USB 1.1 port. HID Compatible. Plug and play Compatible.
• Com：Baud：115200 bit/s, Optional protocol
OS：Windows 2000,Windows Xp, Windows Vista,windows 7 or later , Linux, Mac OS , Android
Construction：PCBA, Aluminum, Infrared filter
Assemble：Easy assemble
Touch Method：
• Finger，gloved hand，unclear-water pointer.
• Center area：Stylus minimum 6mm tip. marginal area(<2.0 cm)： Stylus minimum 8mm tip.
Touch Accuracy：<2mm
Touch Durability：Unlimited
Touch Activation Force：No pressure required
Report Resolution：32767*32767
Touch Response time：Single touch Less than 5 meters in length <20 ms
Light Resistance：
• The side of touch frame with the receiver diode < 10000Lux
• The side of touch frame with the emitting diode is installed on the down edge of the screen, and the touch frame has high light resistance, which is suitable for outdoor use
Front Maintenance：supported
The QC-SUSB module(Optional):
• Fixed Mapping Mode：
①In one touch frame area, a host uses with multiple dispalys of extended mode, each display supports touch (non-simultaneous), up to 64 channels;, and supports up to 64 channels;
②A touch frame area contains multiple monitors of different hosts, each host can be touched at the same time without interfering with each other, and supports up to 32 channels;
③In one touch frame area, touch can be working with multiple displays of different hosts or expand multiple displays of one host ,or in combination
• Dynamic Mapping Mode：
Provide a secondary development kit interface to communicate with the matrix, splicing processor, and other central controllers, which can realize touch synchronization with the addition of signal sources, switching, window opening, and roaming;
Environment：
•Operating Temperature -20 ℃ to 65℃
•Storage temperature: -30°C to 85°C
•Operating humidity:10% to 90% RH, non-condensing
•Storage humidity: 10% to 90% RH, non-condensing
•Electrostatic protection: Per EN61000-4-2 1995:level 4.contact discharge 8KV, air discharge 15 KV
•EMS: IEC61000-4-3：2002 3V/m
•EMI: EN55022-2006 class B
Software & Driver：
•Plug-and-play:
Windows/macOS(Multi-touch Driver is available)/Linux/Android
Debugging detection efficiency is high with intelligent diagnostic software
SDK for system integration & TUIO protocol support
•COM-Interface: Optional protocol, support for up to 5 conference tablet solutions
Warranty：1 year